Table of Contents
Advertisement
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
6. In the Heartbeat text box, type the time interval (in seconds) for which the
mobility agent should wait for the connection establishment response before
trying again. The default is 60.
7. In the Discovery Method drop-down list, select one of the following:
•
SLPD (Service Location Protocol Daemon) – Enables the discovery of
mobility manager Summit WM Switch, using SLP. The mobility manager's
address must be configured on the network using SLP when selecting
this option.
•
Static Configuration – allows the mobility agent to discover the mobility
manager without the SLP support.
•
If you select Static Configuration, Mobility Manager Address text
box is displayed.
•
In the Mobility Manager Address text box, type the IP address of the
Summit WM Switch that will serve as the mobility manager.
8. To save your changes, click Save.
9.4.2.1 Viewing the Mobility Manager display
If you have configured a Summit WM Switch as a mobility manager, two
additional displays appear on the Reports & Displays screen:
•
Client Location in Mobility Zone
•
Mobility Tunnel Matrix
To view mobility manager display:
1. From the main menu, click Reports & Displays. The Reports & Displays
screen is displayed.
2. Click the appropriate mobility manager display.
•
Client Location in Mobility Zone – Displays the active wireless clients
and their status.
You can perform the following actions on the Client Location in Mobility
Zone display screen.
•
Sort this display by home or foreign Summit WM Switch.
•
Search for a client by MAC address, user name, or IP address.
•
Define the refresh rates for the display.
•
Export the information on the display screen as an .xml file
HWC_GSG_Avail&MobilConfiguration.fm
Availability and Mobility configuration
Configuring mobility
135
Advertisement
Table of Contents
