Assigning Radios To Wm-Ad, And Changing The Poll Timeout Value On Altitude Ap Configuration Screen; Assigning The Altitude Aps To Their Home Summit Wm Switch - Extreme Networks Summit WM100 Getting Started Manual

120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
For information, see See
Note: You must use the same SSID on both the primary and the secondary
.
Summit WM Switches
9.2.2 Assigning radios to WM-AD, and changing the
poll timeout value on Altitude AP configuration
screen
Step 2 of the availability configuration process is to assign radios to the WM-AD,
and changing the poll timeout value on Altitude AP configuration screen.
To assign radios to WM-AD and change the poll timeout value:
1. Login on both the Summit WM Switches.
2. From the main menu of the primary Summit WM Switch, click Altitude AP
Configuration. The Altitude A P Configuration screen is displayed.
3. In the left pane, click WAP Default Settings. The default settings are
displayed.
4. In the WAP Properties section, change the default value to 15 in the Poll
Timeout text box.
Note: The Poll Timeout value for availability must be 15.
5. In the WM-AD Assignment section, select the WM-AD that you have defined
for availability.
6. To assign b/g and a radios to the WM-AD, select the corresponding radio
checkboxes.
7. To save your changes, click Save.
8. From the main menu of the secondary Summit WM Switch, click Altitude AP
Configuration. The Altitude AP Configuration screen is displayed.
9. Repeat Step 3 to 7.
9.2.3 Assigning the Altitude APs to their home
Summit WM Switch
Step 3 of the availability configuration process is to assign the Altitude APs to their
home Summit WM Switch.
HWC_GSG_Avail&MobilConfiguration.fm
Availability and Mobility configuration
Chapter 8, "WM-AD configuration".
Configuring availability feature
125