Table of Contents
Advertisement
HWC_GSG_ConfiguringExternalServers.fm
Configuring DHCP, DNS and IAS services
DNS service configuration
6.3 DNS service configuration
76
12. Select Protected EAP (PEAP) or Smart card or other certificate, and click
Next.
13. Click Finish. The new policy is displayed in the right pane.
14. In the right pane, select and right-click the newly configured remote access
policy.
15. Select Properties. The Properties window is displayed.
16. Select Grant Remote Access Permission.
17. Click Apply and then click OK.
18. Click Add. The Attributes window is displayed.
19. Select IP address. The Client IP-Address window is displayed.
20. In the Client IP-Address window, type the Summit WM Switch's IP address.
21. Click OK.
The domain name system (DNS) stores and associates many types of
information with domain names, but most importantly, it translates domain names
(computer hostnames) to IP addresses.
You must install DNS on Windows 2003 Server according to the documents
provided with the server. Visit
DNS on Windows 2003.
The DNS configuration involves two steps:
•
Step 1 – Configuring the DNS for internet access
•
Step 2 – Configuring DNS for Altitude APs discovery.
http://support.microsoft.com
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
to learn how to install
Advertisement
Table of Contents
