Viewing Mobility Agent Display - Extreme Networks Summit WM100 Getting Started Manual

Extreme summit wm100: user guide
Hide thumbs Also See for Summit WM100:
Table of Contents

Advertisement

HWC_GSG_Avail&MobilConfiguration.fm
Availability and Mobility configuration
Configuring mobility
136
Mobility Tunnel Matrix – Displays the state of inter-Summit WM Switch
tunnels as well as the relative loading for user distribution across the
mobility domain.
The Mobility Tunnel Matrix display provides the following information:
Tunnel uptime
Number of clients roamed (mobility loading)
Local Summit WM Switch loading
Mobility membership list
Both displays depict the state of the tunnels in color codes:
Green – Indicates the mobility manager is in communication with an
agent and the data tunnel has been successfully established.
Yellow – Indicates the mobility manager is in communication with an
agent but the data tunnel is not yet successfully established.
Red – Indicates the mobility manager is not in communication with an
agent and there is no data tunnel.

9.4.2.2 Viewing Mobility Agent display

If you have configured a Summit WM Switch as a mobility agent, an additional
display — Agent Mobility Tunnel Matrix — appears on the Reports & Displays
screen.
To view mobility agent display:
1. From the main menu, click Reports & Displays. The Reports & Displays
screen is displayed.
2. Click Agent Mobility Tunnel Matrix. The mobility agent display screen
appears.
The mobility agent display depicts the number of mobility clients in each data
tunnel and shows each tunnel's uptime in color codes:
Green – Indicates the mobility agent is in communication with the mobility
manager and the data tunnel has been successfully established.
Yellow – Indicates the mobility agent is in communication with the mobility
manager, but the data tunnel is not yet successfully established.
Red – Indicates the mobility agent is not in communication with the
mobility manager and there is not data tunnel.
In addition, the display also depicts the mobile clients' location information.
You can look for a specific mobile client by MAC address, IP address, or user
name.
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Summit wm1000Summit wm200Summit wm2000

Table of Contents