Dhcp For Wm-Ad - Extreme Networks Summit WM100 Getting Started Manual

HWC_GSG_Chapter 1_Overview.fm
Summit WM-Series WLAN Switch Software Solution
Conceptual model
18

2.1.5.2 DHCP for WM-AD

DNS Server
Summit WM Switch
Wireless
Device
Figure 3 DHCP for WM-AD
The DHCP configuration for WM-AD is done via Summit WM Switch. For more
information, see Section 8.2, "Creating and configuring a Routed WM-AD", on
page 97.
DHCP Server
Altitude AP
Summit WM, Getting Started Guide
* The wireless device
requests an IP address from
Altitude AP
* The Altitude AP forwards
the request to Summit WM
Switch via WM-AD tunnel
* The built-in DHCP server
in Summit WM Switch
responds by sending the IP
address to Altitude AP
* The Altitude AP sends the
IP address to the wireless
.
device
Wireless
Device
120385-00 Rev 01, March 2007