Table of Contents
Advertisement
3.5 Generating a software license key
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
3.4.2 Configuring the network time using the NTP
To configure the network time using the NTP:
1. Perform Step 1 to Step 7 of
the system's
time".
2. Select Use NTP radio button.
3. In the Time Server 1 text box, type the IP address or FQDN (Full Qualified
Domain Name) of a NTP Time Server that is accessible on the enterprise
network.
4. Repeat Step 3 for Time Server2 and Time Server3 text boxes.
If the system is not able to connect to the Time Server 1, it will attempt to
connect to the additional servers that have been specified in Time Server 2
and Time Server 3 text boxes.
5. Click Apply.
6. Reboot the Summit Switch. The WLAN network time is synchronized in
accordance with the specified time server.
To ensure that all the functionalities are enabled, you must generate a software
license key and apply it to the Summit WM Switch.
The license key is generated through the web-based Central Licensing Server
(CLS).
You must have the following information before you start the license generation
process:
•
CLS URL – Is provided in the Summit WM Switch Base Software Activation
document.
•
Login information (User Name and Password) – Is provided in the Summit
WM Switch Base Software Activation document.
•
MAC Address – Locate the MAC address on the rear panel of the Summit WM
Switch.
•
Serial Number – Locate the serial number on the rear panel of the Summit
WM Switch.
HWC_GSG_Chapter 2_Default_Settings.fm
Summit WM-Series WLAN Switch configuration
Generating a software license key
Section 3.4.1, "Configuring the network time using
43
Advertisement
Table of Contents
