Table of Contents
Advertisement
HWC_GSG_VNSConfiguration.fm
WM-AD configuration
WM-AD topology overview
96
•
Routed WM-AD – The user traffic is tunneled to the Summit WM Switch. This
is the default set-up.
•
Bridge at the WAP WM-AD (Bridge Traffic Locally at WAP) – The user
traffic is directly bridged with VLAN at the AP's point of access (switch port).
•
VLAN bridged WM-AD (Bridge Traffic Locally at SWM) – The user traffic
is tunneled to the Summit WM Switch and is directly bridged with it to a
specific VLAN.
Note: Only the following models support VLAN bridged WM-AD (Bridge Traffic Locally
at SWM):
• Summit Switch WM2000
• Summit Switch WM200
SSID and AAA determine the WM-AD's network assignment. These network
assignments define a framework for carrying out the authentication of the mobile
devices.
Creating a new WM-AD involves the following three steps:
•
Assigning a name to the proposed WM-AD
•
Defining the topology parameters
•
Configuring the WM-AD for authentication and privacy
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
Advertisement
Table of Contents
