Creating And Configuring A Routed Wm-Ad - Extreme Networks Summit WM100 Getting Started Manual

8.2 Creating and configuring a Routed WM-AD

120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide
The user traffic is tunneled to the Summit WM Switch in Routed WM-AD type.
This is the default set-up.
To create and configure a Routed WM-AD type:
1. From the main menu, click WM Access Domain Configuration. The WM
Access Domain Configuration screen is displayed.
2. In the Add subnet text box, type the WM-AD name.
3. Click Add subnet. The name is displayed in the virtual networks list and the
Topology tab is displayed.
HWC_GSG_VNSConfiguration.fm
WM-AD configuration
Creating and configuring a Routed WM-AD
97