Image And Configuration Attributes; Port Attributes; Ip Statistics; Esrp Commands - Extreme Networks BlackDiamond 6800 Installation And User Manual

Image and Configuration Attributes

Except as described below, the ARM supports all of the ExtremeWare commands
associated with managing image and configuration attributes. See the "Software
Upgrade and Boot Options" appendix in the ExtremeWare Software User Guide for more
information. Table 3-8 describes the command changes to support the ARM.
Table 3-8: Changes to Image Commands
Command
download image [<ipaddress> |
<hostname>] <filename> {primary
| secondary} {slot <slot>}
use image [primary | secondary]
{slot <slot>}

Port Attributes

The ARM does not have any external ports. Therefore, the port commands are not
directly applicable to the ARM. The slot that the ARM resides in cannot be used as part
of any port specification on any command.

IP Statistics

Results displayed by the
IP statistics are maintained on all ARMs and are aggregated with the MSM module
statistics prior to being displayed.
Table 3-9: IP Statistics Display Command
Command
show ipstats {vlan <name>}

ESRP Commands

ESRP is supported while Destination Sensitive Accounting is enabled. If accounting is
enabled, ESRP tracks the total number of internal ARM switch fabric ports. Based on
Accounting and Routing Module Installation and User Guide
Description of Change
The slot <slot> option is added to this command to support
downloading of images to a specified ARM. When you enter
the command with this option, the image is downloaded to
the module in the specified slot rather than to one of the
image partitions on the switch.
The slot <slot> option is added to this command to select
which image will load on the module in the specified slot on
the next reboot.
command include IP statistics from all ARMs.
show ipstats
Description of Change
Displays IP statistics for the CPU of the system.
Additional ARM Support Topics
3-25