Deleting An Access Profile Entry; Making Changes To A Routing Access Policy; Removing A Routing Access Policy; Using Route Maps - Extreme Networks BlackDiamond 6800 Installation And User Manual

Configuring the ARM
Table 3-3: Regular Expression Notation
Character Definition
[,] Specifies a range of numbers to be matched.
. Matches any number.
^ Matches the beginning of the AS path.
$ Matches the end of the AS path.
— Matches the beginning or end, or a space.
- Separates the beginning and end of a range of numbers.
* Matches 0 or more instances.
+ Matches 1 or more instances.
? Matches 0 or 1 instance.

Deleting an Access Profile Entry

To delete an access profile entry, use the following command:
config access-profile <access_profile> delete <seq_number>

Making Changes to a Routing Access Policy

You can change the routing access policy by changing the associated access profile.

Removing a Routing Access Policy

To remove a routing access policy, you must remove the access profile from the routing
protocol or VLAN. All the commands that apply an access policy to form an access
policy also have the option of choosing
option removes any access profile of that particular type from the protocol or VLAN,
and, therefore, removes the access policy.

Using Route Maps

Route maps are used to conditionally assign accounting bin numbers to route
destinations. Route maps are used in conjunction with the match and set operations. A
3-10
as the access profile. Using the
none
Accounting and Routing Module Installation and User Guide
none