Extreme Networks BlackDiamond 6800 Installation And User Manual page 39

5 Use the ejector/injector handles to pull the module part way out of the chassis slot.
Do not touch the printed-circuit board or any connector pins.
There is an EMI-preventive gasket attached to one edge of the module front
panel. To prevent diminished EMI protection, handle the module carefully and
avoid damage to this gasket.
6 Grasp the module front panel with one hand and place your other hand under the
metal card carrier to support the weight of the module. Slide the module completely
out of the chassis slot. Place the module immediately into an antistatic sack to
protect it from ESD damage and prevent dust from collecting on the module's
optical fiber connectors.
7 Install and secure the replacement module. See "Inserting and Securing a Module"
on page 2-6 for more details.
Accounting and Routing Module Installation and User Guide
Removing and Replacing an ARM
2-15