Retrieving Accounting Statistics; Using The Cli To Retrieve Accounting Statistics - Extreme Networks BlackDiamond 6800 Installation And User Manual

show iproute route-map
Route Origin Route-Map
Direct
Static
RIP
EBGP
IBGP

Retrieving Accounting Statistics

Accounting statistics are used to bill your customers. Destination Sensitive Accounting
gives you the flexibility to bill your customers at predetermined and different rates. For
a given set of counts, the source VLAN ID identifies the customer and the accounting
bin number corresponds to a billing rate. You need to retrieve the destination sensitive
accounting 64-bit counts of the number of packets and the number of bytes forwarded
to the accounting bin. The following sections describe how to retrieve the accounting
statistics using the Command Line Interface (CLI) or Simple Network Management
Protocol (SNMP).

Using the CLI to Retrieve Accounting Statistics

You can display the accounting statistics for a single VLAN or all VLANs by issuing the
show accounting <vlan>
the packet and octet counts for each bin number per VLAN. Omitting the VLAN name
displays the accounting statistics for all the VLANs.
In the following command example, traffic originates from VLANs six1, six2, six3,
seven1, seven2, seven3, and seven4. All traffic received is sent to destinations mapped
to accounting bin 0.
Accounting and Routing Module Installation and User Guide
dsb1
dsb1
dsb1
dsb2
dsb2
command. The
show accounting <vlan>
Retrieving Accounting Statistics
command lists
3-21