Adding Statements To The Route Map Entries - Extreme Networks BlackDiamond 6800 Installation And User Manual

• The
sequence number
the entry in the route map. Route maps are evaluated sequentially.
• The
permit
applied only if the entry is successful.
• The
match-one
least one of the matching statements is true.
• The
match-all
match statements are true. This is the default setting.

Adding Statements to the Route Map Entries

To add statements to the route map entries, use one of the following four commands:
config route-map <route-map> <sequence number> add match [nlri-list
<access_profile> | as-path <access_profile> | <as-no> | community
[access-profile <access_profile> | <as_num:number> | number <community>]
| next-hop <ipaddress> | med <number> | origin [igp | egp |
incomplete]]
config route-map <route_map> <sequence number> add set [as-path
<as_num> | community [remove | {add | delete} [access-profile
<access_profile> | <as_num:number> | number <number> | next-hop
<ipaddress> | med <number> | local-preference <number> | origin [igp |
egp | incomplete]]
config route-map <route-map> <sequence number> add goto <route-map>
config route-map <route-map> <sequence number> [add | delete] set
accounting-index 1 value <bin_number>
Where the following is true:
• The
route-map
• The
sequence number
is being added.
• The
match
an entry, the statements are sequenced in the order of their operation. The match
statements are first, followed by set, and then goto.
Accounting and Routing Module Installation and User Guide
uniquely identifies the entry and determines the position of
keyword permits the route; the
keyword is a logical "or". The route map is successful as long as at
keyword is a logical "and". The route map is successful when all
is the name of the route map.
identifies the entry in the route map to which this statement
, , and keywords specify the operations to be performed. Within
set goto
keyword denies the route and is
deny
Using Route Maps
3-13