Diagnostics Commands - Extreme Networks BlackDiamond 6800 Installation And User Manual

[1] Nbr Internal Active Ports
Nbr Tracked Rt/Ping:
Nbr Tracked Ports:
Nbr Priority:
Nbr MacID:
Nbr HelloTimer:
Nbr ESRP State:
ESRP becomes active on a VLAN when the VLANs IP interface is up. The
VLANs router interface does not come up until at least one I/O module port in
the VLAN is active.

Diagnostics Commands

The
show diag <slot> iproute
ARM IP routing table is similar to the IP routing table maintained on the MSM module,
but differs in the following ways:
• A maximum of six equal cost routes are stored.
• Directly attached hosts are inserted into the ARM IP routing table as host routes
(OR=ho).
The following commands display the ARM IP routing table:
Show diag slot <slot> iproute [origin | summary | <ipaddress>]
show diag slot <slot> iproute origin [bgp | blackhole | direct | e-bgp
| best-route | i-bgp | ospf-extern1 | ospf-extern2 | ospf-inter |
ospf-intra | rip | static]
The following example displays the ARM IP routing table:
Accounting and Routing Module Installation and User Guide
8
0
0
0
00:01:30:22:EB:00
2
Slave
command displays the ARM IP routing table. The
Additional ARM Support Topics
3-27