Change The Oil In The Exciter Housing; Checking The Rubber Buffers - Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction

8.9.4 Change the oil in the exciter housing

Fig. 83
Fig. 84

8.9.5 Checking the rubber buffers

Perform this maintenance work at the latest after 500
operating hours
NOTICE!
Components may get damaged!
– Use only oil of the permitted specifica-
Ä Chapter 8.3 'Table of fuels and lubricants'
tion
on page 67.
Protective equipment: n
n
1. Park the machine on level ground.
2.
Park the machine in secured condition
the machine in secured condition.' on page 56.
3. Tilt the machine slightly towards the oil drain side and sup-
port it safely.
4. Unscrew oil drain plug (1) and catch running out oil.
5. Stand the machine horizontally.
6. Fill in oil up to the bottom edge of the bore.
7. Turn the locking screw (1) in.
8. Dispose of old oil environmentally.
1. Park the machine in secured condition
the machine in secured condition.' on page 56.
2. Allow the engine to cool down.
BP 25/50
Maintenance – Annually
Working clothes
Protective gloves
Ä Chapter 6.5 'Park
Ä Chapter 6.5 'Park
87