Maintenance – Half-annually
A View from underneath: Alignment
of filter during installation
Fig. 58
8.8.4 Checking the oil level in the exciter housing
Fig. 59
8.8.5 Servicing the V-belt
Preparations
78
8.
Open the fuel valve and check the filter bowl for leaks.
9.
Close the fuel valve again.
10.
Dispose of fuel environmentally.
NOTICE!
Components may get damaged!
–
Use only oil of the permitted specifica-
tion
Ä Chapter 8.3 'Table of fuels and lubricants'
on page 67.
Protective equipment:
n
n
1.
Park the machine on level ground.
2.
Park the machine in secured condition
the machine in secured condition.' on page 56.
3.
Allow the machine to cool down.
4.
Unscrew the oil level inspection plug (1) and check the oil
level.
ð The oil level must reach the bottom edge of the opening,
if necessary fill in oil.
5.
Turn the locking screw (1) in.
1.
Park the machine in secured condition
the machine in secured condition.' on page 56.
2.
Allow the engine to cool down.
BP 25/50
Working clothes
Protective gloves
Ä Chapter 6.5 'Park
Ä Chapter 6.5 'Park