Changing The Oil In The Exciter Housing; Check The Rubber Buffers - Fayat Bomag BP 20/50 Operating Instructions Manual

6.20 Changing the oil in the ex-
citer housing
Caution
!
For quality and quantity of oil refer to the "table
of fuels and lubricants".
Environment
Catch running out old oil, do not let it seep into
the ground and dispose off environmentally.
Tilt the machine slightly towards the oil drain
l
side and support it safely.
Fig. 72
Unscrew plug (Fig. 72), catch old oil.
l
Put the machine in horizontal position.
l
Fig. 73
Fill in oil to the lower edge of the bore (Fig. 73).
l
Screw the plug back in.
l
BP 20/50, BP 25/50

6.21 Check the rubber buffers

Fig. 74
Check all rubber buffers (Fig. 74) for tight fit,
l
cracks and damage and replace immediately if
damaged.
BOMAG
Maintenance every year
57