Loading The Machine - Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction

Loading/transporting the machine – Loading the machine

7.1 Loading the machine

Fig. 37
Fig. 38
58
Loads must only be attached and hoisted by an expert / capable
person.
Do not use damaged or in any other way impaired lashing points.
Use only lifting gear and lifting tackle with sufficient load bearing
capacity for the weight to be loaded. Minimum load bearing
capacity of lifting gear: see operating weight
nical data' on page 11.
Always use appropriate lifting and lashing means on the lifting and
lashing points.
Use lifting and lashing gear only in the prescribed direction of load
application.
Lifting tackle must not be damaged by machine components.
When lifting the machine avoid uncontrolled movements of the
load. If necessary hold the load with guide ropes.
Protective equipment: n
1. Park the machine in secured condition
the machine in secured condition.' on page 56.
2. Allow the engine to cool down.
3. Attach the lifting tackle to the dedicated lifting eye.
4.
DANGER!
Danger to life caused by suspended loads!
– Do not step or stand under suspended loads.
Lift the machine carefully and lower it again at the intended
location.
5. Use these handles (1) to pull the machine on and even sur-
face.
BP 25/50
Ä Chapter 2 'Tech-
Protective gloves
Ä Chapter 6.5 'Park