Table of Contents
Advertisement
Maintenance – Annually
Fig. 79
Fig. 80
Fig. 81
Fig. 82
86
5.
If the starter rope has been torn or the coil has recoiled com-
pletely:
n
Before assembling the rope, turn the coil (2) 5 revolutions
in anti-clockwise direction and align the rope openings in
coil and housing (5) to one another (A).
6.
Secure the coil against winding up. For this purpose tie the
coil (2) to the housing (5) with a cable strap (1).
7.
Untie the knots of the starter rope at both ends and remove
the old starter rope.
8.
Thread in the new starter rope (3) and fix it with knots on
both ends.
9.
CAUTION!
Danger of injury caused by the starter handle
hitting against your body!
–
Do not let the starter handle hit back.
Remove the fixing of the coil and run the starter handle
slowly back to initial position.
10.
Pull the starter handle to check the function and light move-
ment of the recoil starter.
11.
Assemble the recoil starter.
BP 25/50
Advertisement
Table of Contents
