Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction page 76

Fig. 60
Checking the V-belt
Fig. 61
Replacing the V-belt
Fig. 62
3. Disassemble fastening screws (3), washers (2) and V-belt
guard (1).
1. Check condition and tension of the V-belt, replace if neces-
sary.
ð Compression measurement: 5 - 10 mm (0.2 - 0.4 in).
2. Replace a damaged V-belt.
1. Slightly loosen the fastening screws (1) on both sides.
2. Pull the engine carrier forward and take the V-belt off.
3. Install the new V-belt and tighten it.
BP 25/50
Maintenance – Half-annually
79