Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction page 95

Hide thumbs Also See for Bomag BP 25/50:
Table of Contents

Advertisement

Trouble shooting – What to do if the engine has flooded
Fig. 94
Cleaning the spark plug
Fig. 95
98
4.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
Always hold on to a running machine.
Always keep an eye on a running machine.
Operate the recoil starter, until the engine starts.
If the engine does not start after 10 to 20
attempts, clean the spark plug.
Protective equipment:
n
n
n
Special tool:
n
2.
Pull off the spark plug socket.
3.
Unscrew the spark plug using a 13/16 inch spark plug
spanner.
4.
Operate the recoil starter several times.
5.
CAUTION!
Danger of eye injuries caused by particles
flying around!
Wear your personal protective equipment
(safety gloves, protective working clothes,
goggles).
Dry the spark plug with a clean cloth or blow it dry with com-
pressed air.
6.
If necessary clean the spark plug with a wire brush.
7.
Screw the spark plug carefully in by hand and once the
sealing surface of the used spark plug is in contact tighten for
another 1/8 to 1/4 turn with the spark plug spanner.
8.
Plug the spark plug socket back on.
9.
Repeat the starting procedure.
BP 25/50
Working clothes
Protective gloves
Safety goggles
13/16 inch spark plug spanner

Advertisement

Table of Contents
loading

Table of Contents