Noise And Vibration Data; Noise Data; Vibration Data - Fayat Bomag BP 25/50 Operating Instruction, Maintenance Instruction

Technical data – Noise and vibration data

2.1 Noise and vibration data

2.1.1 Noise data

Sound pressure level at the opera-
tor's place
Guaranteed sound power level

2.1.2 Vibration data

Hand-arm vibration
14
The following noise and vibration data were determined in accord-
ance with the following guidelines under equipment specific condi-
tions and by using harmonized standards:
n EC Machine Directive edition 2006/42/EC
n Noise Emission Directive 2000/14/EC, Noise Protection Direc-
tive 2003/10/EC
Vibration Protection Directive 2002/44/EC
n
During operation these values may vary because of the prevailing
operating conditions.
L = 94 dB(A), determined acc. to ISO 11204 and EN 500.
pA
WARNING!
Loos of hearing caused by too high noise burdens!
– Wear your personal protective outfit (ear
defenders).
L = 108 dB(A), determined acc. to ISO 3744 and EN 500.
WA
Vector total of the weighted effective acceleration in three orthog-
onal directions:
Weighted total vibration value
a = 5.2 m/s 2 on crushed rock determined acc. to ISO 5349 and
hv
EN 500.
Observe the daily vibration load (Industrial safety acc. to 2002/44/
EEC).
BP 25/50