Tests before taking into operation – Checking the engine oil level
5.3 Checking the engine oil level
Fig. 18
46
NOTICE!
Danger of engine damage!
–
+Use only oil of the permitted specifica-
Ä Chapter 8.2.1 'Engine oil' on page 65.
tion
Protective equipment:
n
1.
Clean the area around the oil dipstick (1).
2.
Unscrew the dipstick and wipe it clean with a lint-free, clean
cloth.
3.
Insert the dipstick into the oil filler socket, do not screw it in,
but pull it out again to check the oil level.
4.
NOTICE!
Danger of engine damage!
–
Do not overfill with engine oil.
The oil level must always be between the "MIN"- and "MAX"-
marks. If the oil level is too low, top up oil to the "MAX" mark
immediately.
BP 25/50
Protective gloves