Advertisement
unit into the
"Dealer McxW'
for editing
the channel
settings, do the following:
1. while pressing and holding the [LAMP] and [O] buttons, switch the power "on'. After 2
seconds the radio enters the dealer mode and %EL" appears on the display.
2. While in dealer mode, press [m] to enter the Channel Setting mode.
Table 2.7 shows the fUnction options that can be selected while in this mode. While in this
mode, the Channel Sekctor knob is used to set functions "ON" or "OFF" or to select the
setting. After a function is set, pressing the [Pm button stores the setting and increments the
menu to the next function option.
when the [PTTJ button is pushed, a beep will sound to
Also,
confirm the setting.
at any
time while reviewing the function options will cause the unit to
exit the selection mode and revert back to the dealer mode screen. The current function option
has been
'End" will appear on tha display, To exit dealer mode, cyde the power 'off" and then back *on".
Page 17
Advertisement
