Advertisement
Used to enable or disable auxiliary functions. Press each key to enable its
corresponding
function.
Used to enter, store, or send DTMF codes.
Used to switch between transmit and receive mode.
Used to turn "on" or 'off the LCD backliiht. Press the [LAM4 button, the backlight will
pressing any key, except the [LAMP] button, the timer will re-start. To turn "off the
backliiht, press the [LAMP] button again.
Used to monitor the selected channels.
SPEAKER-MICROPHONE JACK
Used to connect with external the speaker-microphone, programming cable, or cloning
cable.
1.7 LCD kons
Channel Number- Displays channel number. Factory default
Channel Lab& Displays characters of the channel label. Up to 16 alphanumeric characters can
be programmed. Any label over 8 charactars will scroll across the display.
RELM Communhtions
channel frequency.
Page 3
Advertisement
