Advertisement
CALL
ALERT/
TRANSPOND
If any of the functions in Table 2.3 and Table 2.4 are set to "Off", the related setting shown in
can be set, but tha setting will not be recognized.
Page 14
Disabled
CAT OFF ' _
Call Alert
CAT RING
CAT BEEP
TRANSPOND
(Call
Alert).
CAT CALT
TRANSPOND (ID
CAT IDCD
TRANSPOND
(Transpond
Code)
CAT TRCD
Disabled
The radio flashes the LED indicator and
rings when it decodes a two-tone or
DTMF signal.
The radio flashes the LED indicator and
beeps when it decodes a two-tone or
DTMF signal.
The radio flashes the LED indicator and
rings when it decodes a two-tone or
DTMF signal; and it transmits the alert
back to the sending radio.
The radio llashes the LED indicator
when it decodes a two-tone or DTMF
signal. If DTMF is used, the receiving
radio also transmits the DTMF ID code
(listed in the Channel programming)
back to the sending radio.
The radio flashes the LED indicator
when It decodes a two-tone or DTMF
signal. If DTMF is used, the receiving
radio also transmits the DTMF ID code
(listed In the DTMF Auto ID that is
stored in location 0) back to the
sending radio. If no DTMF Auto ID is
stored in location 0, the receiving radio
will not transpond.
RELM Communications
Advertisement
