Advertisement
DTMF
SIGNAL .ING
met to 7XW; and the 2-Tone settings will be reset to V".
RELM Communications
DKEYA 1
DKEYA 16
DTMF OFF
DTMF CSQ
DTMF SEL
O - 9
IMC A
A - D
IMC D
IMC E
GRPC A
GRPC D
GRPC E
GRPC F
O F F
40 OFF
SART 1
Is - 15s
SART 10
SART 15
When transmitting, the radio transmits
an w-modulated signal for the
programmed time when [DIAL] and the
D key is pressed.
Disabled
When the respective
DTMF code is
received on a channel, the radio will
ring for approximately 10 seconds and
receiver audio will open. The ringing
can be terminated by the user
responding with a transmission or by
pressing the MONI button.
Conditions: 1. The receiving radio must
have a three digit DTMF ID Code
programmed. 2. The transmitting radio
must be programmed with a 3-digit
DTMF ID code, a ldigit Intermediate
Code, and a I-5 digit Message code.
(i.e. 123 # 4567). The whole
message string is sent when the [DIAL]
key is pressed.
The digit that separates the 3 digit
DTMF ANI code to be decode and the 1
to 5 digit message (Ex. 123 # 4567)
Disabled
a group, not for an individual.
Disabled
After a DTMF signal is decoded, it is
the period of time before the squelch is
reset to the ready state of decoding
another DTMF signal.
Page 13
J
Advertisement
