Programmer Details; Transmit Time Out Timer (Tot); Scan Delay; Priority Delay - RELM PM4500 Instruction Manual

This manual contains instructions for using the PM4500
Programmer (simply referred to as the Programmer) to
program the Mini-Corn@ Plus 16 and 99 Channel SM
Series Transceivers.
The Programmer has a non-volatile memory that requires
no battery to maintain data.
The Programmer is used for:
1. Assigning to the Transceiver the following Options
or Configuration Parameters:
n
Transmit Time-Out Timer
n

Scan Delay

n

Priority Delay

n

Key Pad Beep

n

Channel 1 Beep

n
Off Hook to Prioriiy Channel
n

Off Hook Scan

n

Power Up on Channel 1

n

TX Carrier Delay

n
Message Annunciator
n
Talk Around
n
Range
2. Assigning to each channel the following parameters:
n
Busy Channel Lockout (BCL)
n
RX' Tone, DCS' Code or External Decoder
n
Transmit Frequency
n
TX' Tone, DCS' Code or External Encoder
3. Cloning:
n
Transferring data from the Transceiver to the
Programmer (ReadOperation)
n from
Transferring data
Transceiver (Write Operation)
'DCS stands for Digital Coded Squelch
RX stands for Receive: TX stands for Transmit
the Programmer to the
The Programmer contains a keyboard (see Figure
below) with 20 keys arranged in a 4 x 5 matrix. A 6-
character LCD* display lights up when power is
applied.
All Programming and Cloning information is indicated
on the Programmer's LCD display.
The Unit operates on 12VDC power from the Trans-
ceiver. Data between the Programmer and the Trans-
ceiver is transferred through a modular plug connected
to the Microphone jack on the Transceiver.
*LCD stands for Liquid Crystal Display
C H A N N E L 1
OPTIONS 4
m m
SIMPLEX
C L O N E
ESCAPE TOGGLE
KEYBOARD
ENTER
DELETE