Advertisement
1 GENERAL INFORMATION
1 .I IntmductIon
This manual contains information about field programming through the keypad of the RELM
Wireless RP99APlus series handheld VHF and UHF radiis. This manual is intended for use by
experienced techn'tins familiar with similar types of mmerdal grade communications
equipment. It contains service information and data for the equipment.
The following precautions are recommended for personal safety:
DO NOT transmit until all RF connectors
l
SHUT OFF and DO NOT operate this equipment near elect&al blasting caps or in an
l
explosive
atmosphere.
Only qualified technicians should maintain this equipment.
l
1 . 2
The RlWAPlus series radiis are self-contaii VHF or UHF FM Radiis covering the
frequency range of 148MHr to 174MHz for VHF
digitally synthesized using
and
Tone, DCS Code, Two-Tone, and Dual Tone Multiple Frequency/Automatic Numeric Identifier
and
send, mpeater talk-around, and hi transmit power, various display modes, adding and
deleting
from the scan list, key lock, and more. Status and channel information is
channels
displayed over an alphanumertc
side of the unit for an external antenna, microphone, speaker, and other optional accessories.
A wida vartety of optional accessories are available for the RP hand held radii. Contact your
RELM Wireless dealer for complete information.
1.4
This equipment must be licensed by the Federal Communications Commission (FCC) before it
may be used. Your RELM Wireless dealer can assist you in filing the appropriate application
for the FCC,
will program each radio with your
and
codes.
1 .J
If you need technical assistance, contact a RELM Communications sewice technician:
Phone: (800) 422-8281
are
and
a single aystal
7100 Technology Drive
secure
and
properly terminated.
for frequency control. The
frequencies and signaling
authorized
Advertisement
