Table of Contents
Advertisement
DOK-SUPPL*-VAM*11/41**-PR03-EN-P
Rexroth IndraControl VAM 11.1/41.1 Machine Control Panels
7.8.2
Pin Assignment of the VAC 30.2 Connection Module
Fig.7-19:
Connection module hand-held terminal
Pin
X1.1 pin1
X1.1 pin2
X1.1 pin3
X1.2 pin1
X1.2 pin2
X1.2 pin3
X1.1 pin4
X1.2 pin4
X2.1 pin1
X2.1 pin2
X2.1 pin3
X2.1 pin4
X2.2 pin1
X2.2 pin2
X2.2 pin3
X2.2 pin4
Fig.7-20:
Pin assignment of the connection module hand-held terminal
The connection module integrated in the VAM 11 and in the VAM 41 for a hand-
held terminal IndraControl VEH 30.1/30.2 or VCH 08.1 is also available as non-
integrated device with the name VAC 30.2.
The IndraControl VAC 30.2 connection module including automatic STOP but‐
ton jumpering is supplied with voltage via X1.1 pin1 or X1.2 pin1. The connected
hand-held terminal is supplied with voltage via X1.1 pin3 or X1.2 pin3. To make
the hand-held terminal engageable or disengageable when it is plugged-on, the
wire link between X1.2 pin1 and X1.2 pin3 is to be removed and the switching
voltage for the hand-held terminal is to be applied to X1.1 pin3 or X1.2 pin3.
Bosch Rexroth AG
Signal name
DC 24 V connection module VAC 30
0 V
DC 24 V hand-held terminal
DC 24 V connection module VAC 30
0 V
DC 24 V hand-held terminal
Terminal connected IN
Terminal connected OUT
STOP button 1 IN
STOP button 1 OUT
STOP button 2 IN
STOP button 2 OUT
Enabling button 1 IN
Enabling button 1 OUT
Enabling button 2 IN
Enabling button 2 OUT
57/83
Interfaces
Advertisement
Table of Contents
