Warranty Policy - Argon 18 E-Road Operation Manual

Notes

Warranty Policy

Argon 18 warrants—under the terms and
conditions outlined below—the exclusive product
to which this warranty applies, to be exempt
from material or manufacturing defects. The
Argon 18 warranty is the purchaser's protection
against manufacturing defects, and it replaces
all previous warranties, declarations or promises
made in writing or verbally.
Every Argon 18 product has a useful life cycle.
This useful life cycle is not the same as the
Warranty period. This Warranty is not meant to
suggest or imply that the frame cannot be broken
or will last forever. Bicycles and/or frames will not
last forever. The length of the useful life cycle
will vary depending on the type of frame, riding
conditions and care the bicycle receives.
Competition, trail riding, riding
conditions or climates, riding with heavy loads
or any other non-standard use can substantially
shorten the useful product life cycle of an Argon
18 product. Any one or a combination of these
conditions may result in an unpredictable failure
of an Argon 18 frameset that would not qualify as
a material or manufacturing defect.
It is the responsibility of each end-user to
periodically have their bike reviewed by an
authorized Argon18 dealer to identify potential
failures and wear & tear indicators, for example
cracks, corrosion, dents, deformation, paint
peeling. These are important safety checks and
The warranty term may be extended by two years, effective upon registration by the purchaser online;
a form and a registration survey must be completed.
52
Please unfold! Please note the bicycle identification and handover documentation!
imperative to help prevent accidents, bodily injury
to the rider and to avoid shortening the useful life
cycle of an Argon 18 product. A user should not
ride its bike if it has as structural default. ARGON
18 SHALL NOT BE RESPONSIBLE IF A USER
DECIDES TO RIDE THEIR BIKE EVEN IF IT
HAS A STRUCTURAL DEFAULT.
1. CONDITIONS OF THE WARRANTY
This warranty only covers Argon 18 exclusive
products and products manufactured by Argon
18.
The warranty only applies to the first buyer and
is not transferable. Date proof of purchase is
necessary to benefit from the warranty.
The products must have been purchased from
an authorized Argon 18 retailer or distributor.
in severe
No dealer, agent, distributor, or Argon 18
employee is authorized to modify, extend, or
broaden the scope of the warranty.
Other parts and components that are not Argon
18 are covered by their respective manufacturer's
warranty.
2. DURATION OF THE WARRANTY
The following Argon 18 exclusive components are
guaranteed against material and manufacturing
defects for period of three years (3) from the date
of the retail purchase when bought as part of a
frameset or complete bike:
• Argon 18 Frameset
• Argon 18 Fork
• Argon 18 Seatpost
• Argon 18 Handlebars
(for specific models)
This warranty period can be extended to five (5)
years if the online warranty form and survey are
filled within thirty (30) days following the bicycle's
or frameset's retail date of purchase, on our
website at www.argon18bike.com.
The following Argon 18 Components are
guaranteed for one (1) year from the date of retail
purchase:
• Argon 18 Seatpost collar
• Argon 18 Headset
• Argon 18 brakes
• Paint and finish
• Motors
• Battery
• Cables
The online registration of the bike or frameset
does not offer extended warranty on these items.
There is no extension of warranty on repaired
products.
Argon 18 parts sold separately as spares are
guaranteed for one (1) year from the date of
purchase.