Creating Your Own Startup Screen - Epson PowerLite G5000 User Manual

If the password is not correct, you see a message prompting you to
re-enter the password. If you enter an incorrect password three times
in succession, you see the message
The projector's operation will be
and the projector switches to standby mode. Disconnect the
locked
projector's power cord from the electrical outlet, reconnect it, and
turn the projector back on.
When you see the Password screen again, you can try to enter the
correct password.
If you enter an incorrect password 30 times in succession, the
projector remains locked and you must contact Epson to unlock it.
If you have forgotten the password, contact Epson with the request
code number that appears in the Password screen for assistance.
See "Where To Get Help" on page 93.

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the button. The image can be a company
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Fine-Tuning the Projector
56