Solving Network Problems - Epson PowerLite G5000 User Manual

If your presentation includes computer audio, make sure the
■
volume control on your computer is not turned all the way down
or muted. In Windows, you may be able to check this by clicking
the volume control in your Windows system tray (lower right
corner of the screen). On a Mac
volume from your menu bar (top right corner of the screen) or via
the volume control function keys.
If you're using a DVD player or other video source, make sure the
■
cables are connected correctly, as described on page 21.
If you're using a computer audio cable, make sure it is connected
■
to your computer's
Connect the other end to the projector's
Computer2 port) when the computer's video cable is connected
to the
Computer1

Solving Network Problems

The projector does not send e-mail alerts even though the
e-mail notification function has been turned on.
Make sure the mail notification function is set correctly in the
■
configuration menu. See page 67.
■ Set Standby Mode to
Otherwise, the projector cannot send e-mails when it is in
Standby mode (when the power is off).
If a critical problem develops with a projector which causes it to
■
suddenly stop working, it may not be possible for the projector to
send a message.
Make sure the projector is plugged in.
■
Make sure the LAN cable is connected correctly. Reconnect it if it
■
is not connected or it is not connected correctly (see page 23).
For problems with EMP Monitor, see the EMP Monitor Operation
Guide.
®
, you may be able to adjust the
headphone jack or
Audio
or ports.
Computer2
in the Extended menu.
Network On
audio out jack.
port (beneath the
Solving Problems
91