Disabling The Projector's Buttons - Epson PowerLite G5000 User Manual

note
You can lock these settings to
prevent them from being
changed without a password
(see page 54).
Fine-Tuning the Projector
58
Choosing When to Display the Image
After your image is saved, you can set it to display as the startup
screen, the screen you see when there's no signal, or the screen you see
when you press the
A/V Mute
1. Press the button, highlight the
Menu
.
Enter
2. Select and press
Display
3. Choose from these display options:
Set
■ Display Background
when there is no signal.
Set
■ Startup Screen
projector is warming up.
Set
■ A/V Mute
the
A/V Mute
4. When you're finished, press

Disabling the Projector's Buttons

When you enable the Control Panel Lock function, you can lock all of
the projector's buttons, or all of the buttons except the Ppower
button. The remote control can still be used to operate the projector.
1. Press the button, highlight the
Menu
.
Enter
2. Select
Control Panel Lock
3. Select (to lock all projector buttons) or
Full Lock
lock all buttons except the
4. Select and press
Yes
5. Press the button to exit.
Menu
To disable the Control Panel Lock function, select
Panel Lock menu. Or press and hold the
projector's control panel for 7 seconds. A message is displayed and the
lock is released.
button (see page 39).
Extended
.
Enter
to to display your image
Logo
to to display your image when the
On
to to display your image when you press
Logo
button.
to exit.
Menu
Settings
and press the
button) and press
Power
to confirm the setting.
Enter
Enter
menu, and press
menu, and press
button.
Enter
(to
Partial Lock
.
Enter
in the Control
Off
button on the