note
The
,
, and
BNC
EasyMP
buttons are not
HDMI
applicable to this projector.
Displaying and Adjusting the Image
28
Displaying an Image
You may need to select the image source if you have multiple video
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.
If you don't see the image you want, press the
of the
buttons on the remote control, or the
Source
button on the projector until you see the image you want to project.
You can also use the
Source
between devices connected to the ports identified on each button.
Troubleshooting Display Problems
Follow these guidelines if you're having trouble displaying an image.
You Can't Project an Image
If you don't see the image you are trying to project, try the following:
Make sure the cables are connected correctly, as described
■
beginning on page 11.
■
Make sure the P power light is green and not flashing and the
lens cover is removed.
Search
buttons on the remote control to switch
button or one
Source Search