note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
Solving Problems
90
3. Adjust the
Sync
The image is too light or dark, or colors are incorrect.
Use the
■
Color Mode
adjust the color (see page 48).
■
If you're displaying video, adjust the
settings on the Image menu. You can also try
Color Mode
adjusting the
Color Saturation
settings on the Image menu.
Try adjusting the
■
Brightness
menu.
Try adjusting the
■
Brightness Control
Check your computer display settings to correct the color balance.
■
The projector's lamp may need to be replaced. See page 74 for
■
instructions.
Make sure the correct input signal is selected in the Signal menu
■
(see page 51).
Make sure that all cables are connected to the proper ports and
■
connected securely.
There is no sound, or the sound is not loud enough.
■
In order to play sound, you must connect optional external
speakers (see page 21).
■
Use the
buttons on the remote control to adjust the
Volume
volume, or adjust the
(see page 53).
Make sure A/V Mute is not enabled. (The
■
have been pressed.)
setting to increase the image sharpness.
option in the projector's Image menu to
Color Adjustment
,
ABS Color Temp
and
Contrast
setting (see page 52).
setting in the Settings menu
Volume
A/V Mute
and
, and
Tint
settings on the Image
button may