The Projector And Notebook Don't Display The Same Image - Epson PowerLite G5000 User Manual

If you've connected more than one computer and/or video source,
■
you may need to press the
projector's control panel, or the
buttons on the remote control to select the correct source.
Source
(Allow a few seconds for the projector to sync up after pressing the
button.)
■ If you're using a PC notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be
labeled or have an icon such as
CRT/LCD
hold down the
Fn
the projector to sync up after changing the setting.
The Projector and Notebook Don't Display the
Same Image
If you're projecting from a notebook, and you can't see your image on
the projection screen and on your computer at the same time, follow
these guidelines.
If you're using a PC notebook:
On most systems, there's a function key that lets you toggle
■
between the LCD screen and the projector, or display on both at
the same time. It may be labeled
. You may have to hold down the
Allow a few seconds for the projector to sync up after changing
the setting.
If the function key doesn't permit you to display simultaneously
■
on both screens, you should check your monitor settings to make
sure both the LCD screen and the external monitor port are
enabled.
From the Control Panel, open the
Properties dialog box, click the
. The method for adjusting the settings varies by
Advanced
brand; you may need to click a
external Monitor port is set as your primary display and/or
enabled. See your computer's documentation or online help for
details.
Source Search
button or one of the
Search
key while pressing it. Allow a few seconds for
CRT/LCD
Fn
Display
Settings
tab, then make sure the
Monitor
button on the
. You may have to
or have an icon such as
key while pressing it.
utility. In the Display
tab, then click
Displaying and Adjusting the Image
29