Epson PowerLite G5000 User Manual page 89

If the projector is angled sharply toward the screen, it may not be
■
possible to focus the entire image. Move the projector to position
it more directly in front of the screen.
■ Lower the projection angle to reduce the amount of keystone
correction required.
■ Make sure the projector is within the proper range (projection
distance) from the screen (see page 99).
■ Make sure the lens is not fogged by condensation. You may need
to wait before using the projector after moving it from a cold
environment to a warm environment.
If you're projecting from a computer, you may need to adjust the
■
tracking and sync settings as described in the next section.
You see vertical bands or the image still looks blurry after
trying the solutions in the previous section.
If you're projecting from a computer and displaying an image that
■
contains a lot of fine detail, you may notice vertical bands or some
of the characters may look heavy or blurred. Press the
button on the remote control or the
projector to reset the projector's Tracking, Sync, and Position
settings.
If further adjustment is needed, you can fine-tune the
■
and settings manually using the Signal menu, as described
Sync
on page 51.
1. Fill the screen with an image containing fine detail, such as a
pattern to appear as your desktop background, or try
projecting black text on a white background.
2. Adjust the
Tracking
button on the
Enter
to eliminate vertical bands.
note
You must be projecting an
image for the
Auto
to have any effect. It works
only with computer images
projected through the VGA
port.
Tracking
Solving Problems
button
Auto
89