Displaying and Adjusting the Image
36
Resizing Video Images
You can use the
Aspect
aspect (width to height) ratio, depending on the input signal.
(for images sent through the
■
Normal
ports only)
Displays images using the full projection area and
:
maintains the aspect ratio of the image. Choose this setting to
automatically resize the image and make the best use of the
display area.
Displays images using the full projection area at an aspect
■
4:3:
ratio of 4:3.
Converts the aspect ratio of the image to 16:9. 4:3 ratio
■
16:9:
images are elongated horizontally to fit.
Displays images as is (aspect ratio and resolution are
■
Through:
maintained). Black bands appear if the resolution is less than
1024 × 768; images are cut off if the resolution is over
1024 × 768.
Press the
button repeatedly to cycle through the available
Aspect
options.
You can also change the aspect ratio using the projector's Signal
menu. See page 50 for details.
button on the remote control to change the
Computer1
or
Computer2