Epson PowerLite G5000 User Manual page 51

■ Tracking
Adjust this value to eliminate vertical stripes in computer
images.
■
Sync
Adjust this value if computer images appear blurry or flicker.
■
Position
If the image is slightly cut off on one or more sides, it may not
be centered exactly. Select this setting and use the
button to center it.
■
Progressive
For composite video, S-video, and component video signals
only. Turn this setting on to convert interlaced signals into
progressive signals (best for still images). Select
viewing general video images. Select
images, CG, and animated images. Leave the setting
moving images.
■
Noise Reduction
Smooths out rough images. Select your favorite setting.
Epson recommends that you select
sources with very low noise, such as DVDs.
■
Input Signal
If the colors don't look right on the
setting for the type of equipment you've connected to the
or
Computer1 Computer2
computer or RGB-video connection, and
video player that outputs a component video signal (with
connectors labeled Y/Cb/Cr or Y/Pb/Pr).
Video
for movie
Film/Auto
when viewing image
Off
setting, select the
Auto
ports. Choose for a
RGB
Component
note
You can also use the remote
control's
Auto
automatically reset the
projector's Tracking, Sync,
and Position settings. See
page 89 for details.
pointer
for
for
Off
note
The Noise Reduction setting
cannot be set for digital
RGB signals.
for a
Fine-Tuning the Projector
button to
51