Epson PowerLite G5000 User Manual page 14

note
After positioning the
projector, you may want to
connect a Kensington
®
MicroSaver anti-theft
device to the lock port on the
projector. You can purchase
this from Epson; see
.
page 10
Setting Up the Projector
14
Ideally, you should place the projector directly in front of the center of
the screen, facing it toward the screen squarely. The base of the lens
should be about level with the bottom of the screen.
Projector
If you place the projector below screen level, you can use the vertical
lens shift dial to raise the lens (see page 32). You can also tilt the
projector up by extending the front adjustable foot. Tilting the
projector causes the image to become "keystone" shaped, but you can
correct the distortion (see page 33).
For instructions on installing the projector in a permanent location,
such as a theater or conference room, see page 95.
Screen