Accessing The Ethernet Submenu; Table 16 Serial Submenu Options - H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes

Table 16 Serial submenu options

Option
<1> Download Image Program To
SDRAM And Run
<2> Update Main Image File
<3> Update Backup Image File
<4> Download Files(*.*)
<5> Modify Serial Interface Parameter
<0> Exit To Main Menu
NOTE:
To set the current storage medium, see

Accessing the Ethernet submenu

You can upgrade the Comware software through the management Ethernet port from the Ethernet
submenu and configure file transfer settings.
14. Enter 3 in the EXTENDED-BOOTWARE menu and press Enter to access the Ethernet
submenu.
Enter your choice(0-9):3
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is sda0
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-5):
Tasks
Load and run Comware images in SDRAM.
This option is available only if password recovery capability is
enabled.
Download Comware images to the current storage medium as
the main images (the file attribute is set to M).
As a result, the M file attribute of the original main images is
removed.
Download Comware images to the current storage medium as
backup images (the file attribute is set to B).
As a result, the B file attribute of the original backup images is
removed.
Download files from the server to the device.
Change the baud rate of the console port.
The baud rate change is a one-time operation. The baud rate
will restore to the default (9600 bps) at reboot. To set up a
console session with the device after a reboot, you must
change the baud rate setting on the configuration terminal to
9600 bps.
Return to the EXTENDED-BOOTWARE menu.
"Managing storage media."
44
|
|
|
|
|
|
|
|