H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes page 34

|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-5):
3. Enter 2 or 3 in the Ethernet submenu to upgrade the main or backup software images. For
example, enter 2 to upgrade the main software images.
Loading.....................................................................
............................................................................
.........................Done!
94786560 bytes downloaded!
Image file main-cmw710-boot-A9615.bin is self-decompressing...
Saving file sda0:/main-cmw710-boot-A9615.bin ......Done.
Image file main-cmw710-system-A9615.bin is self-decompressing...
Saving file sda0:/main-cmw710-system-A9615.bin .......................
............................................................................
..................Done.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is sda0
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-5):
4. Enter 0 in the Ethernet submenu to return to the EXTEND-BOOTWARE menu.
5. Enter 1 in the EXTEND-BOOTWARE menu to run the new Comware images.
Using FTP to upgrade system software through the management Ethernet port
1. Enter 3 in the EXTEND-BOOTWARE menu to access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is sda0
|<1> Download Image Program To SDRAM And Run
|<2> Update Main Image File
|<3> Update Backup Image File
|<4> Download Files(*.*)
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|<Ensure The Parameter Be Modified Before Downloading!>
============================================================================
Enter your choice(0-5):
2. Enter 5 in the Ethernet submenu to configure the network settings.
NOTE:
To use the existing setting for a field, press Enter without modifying the setting.
======================<ETHERNET PARAMETER SET>==============================
.
29
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|