Resolved Problems In R9628P2412; Resolved Problems In R9628P2410; Resolved Problems In R9628P24; Resolved Problems In F9628P22 - H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes

Resolved problems in R9628P2412

None.

Resolved problems in R9628P2410

202102070830

Symptom: The CPU usage information of the 2.6GHz multi-core CPU is abnormal. Some cores'
usage rates exceed 100%.

Condition: This symptom occurs when you execute the display process cpu
command to view CPU usage information on the device running R9628P24 or a lower version.
202102040409

Symptom: Traffic cannot match security policy rule 1 as expected but is permitted by a
permit-any security policy rule. However, the traffic can match rule 1 after you disable, enable,
and accelerate rule 1.

Condition: This symptom occurs if security policy rule 1 that uses an application group is
configured, and traffic matching rule 1 is injected after the device reboots.

Resolved problems in R9628P24

None.

Resolved problems in F9628P22

None.

Resolved problems in F9628P20

None.

Resolved problems in F9628P18

202006270148

Symptom: The CPU of the device is restarted or gets stuck.

Condition: This symptom occurs if DPI is enabled on the device and the device receives mixed
application layer traffic.

Resolved problems in F9628P16

202005260338

Symptom: Login through SSH is slow.

Condition: This symptom occurs if the device receives light traffic at 50 Mbps.
10
|
i drv