H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes page 39

7. Enter 0 to return to the BootWare Operation menu.
8. Enter 0 in the BootWare Operation menu to return to the EXTEND-BOOTWARE menu.
9. Enter 0 in the EXTEND-BOOTWARE menu to reboot the system.
Using FTP to upgrade BootWare through the management Ethernet port
1. Enter 7 in the BootWare menu to access the BootWare Operation submenu.
=========================<BootWare Operation Menu>==========================
|Note:the operating device is sda0
|<1> Backup Full BootWare
|<2> Restore Full BootWare
|<3> Update BootWare By Serial
|<4> Update BootWare By Ethernet
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
2. Enter 4 in the BootWare Operation submenu to enter the Ethernet submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extended BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
3. Enter 4 in the Ethernet submenu to configure the network settings.
NOTE:
To use the existing setting for a field, press Enter without modifying the setting.
==========================<ETHERNET PARAMETER SET>==========================
|Note:
|
|
============================================================================
Protocol (FTP or TFTP) :ftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Subnet Mask
Gateway IP Address
FTP User Name
FTP User Password
For more information about the fields, see
After you finish setting the FTP parameters, the system returns to the BOOTWARE
OPERATION ETHERNET submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
'.' = Clear field.
'-' = Go to previous field.
Ctrl+D = Quit.
:Main.btw
:
:Main.btw
:
:192.168.0.2
:192.168.0.1
:255.255.255.0
:0.0.0.0
:admin
:******
Table 10.
34
|
|
|
|
|
|
|
|
|
|
|
|
|
|