Modifying Serial Port Parameters; Upgrading The Extended Bootware Segment; Upgrading The Entire Bootware - H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes

Option
<3> Update Full
BootWare
<4> Boot Extended
BootWare
<5> Boot Backup Extend
BootWare
<0> Reboot
Ctrl+U: Access BASIC
ASSISTANT MENU

Modifying serial port parameters

To change the baud rate of the console port:
9. Enter 1 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 1
===============================<BAUDRATE SET>===============================
|Note:'*'indicates the current baudrate
|
|---------------------------<Baudrate Available>---------------- ----------|
|<1> 9600(Default)*
|<2> 19200
|<3> 38400
|<4> 57600
|<5> 115200
|<0> Exit
============================================================================
Enter your choice(0-5):
10. Enter the number that represents the baud rate you want to choose. For example, enter 5 to set
the baud rate to 115200 bps.
NOTE:
Baud rate change is a one-time operation. The baud rate will restore to the default (9600 bps) at
reboot. To set up a console session with the device after a reboot, you must change the baud rate of
the configuration terminal back to 9600 bps.

Upgrading the extended BootWare segment

Enter 2 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCC

Upgrading the entire BootWare

Enter 3 in the BASIC-BOOTWARE menu.
Task
Upgrade the entire BootWare,
including the basic segment and
the extended segment.
Run the primary extended
BootWare segment.
Run the backup extended
BootWare segment.
Reboot the device.
Press Ctrl+U to access the BASIC
ASSISTANT menu.
Change The HyperTerminal's Baudrate Accordingly
38
Reference
Upgrading the entire BootWare
Running the primary extended
BootWare segment
Running the backup extended
BootWare segment
N/A
Accessing the BASIC ASSISTANT
menu
|
|
|
|
|
|
|
|