H3C SECPATH 5080F-CMW710-R9628P2414 Release Notes page 38

3. Enter 4 in the Ethernet submenu to configure the network settings.
NOTE:
To use the existing setting for a field, press Enter without modifying the setting.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field.
| '-' = Go to previous field.
| Ctrl+D = Quit.
============================================================================
Protocol (FTP or TFTP):tftp
Load File Name
Target File Name
Server IP Address
Local IP Address
Subnet Mask
Gateway IP Address
For more information about the fields, see
After you finish setting the TFTP parameters, the system returns to the BOOTWARE
OPERATION ETHERNET submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extended BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
4. Choose an option from options 1 to 3. For example, enter 1 to upgrade the entire BootWare
image.
Loading..............Done.
64245 bytes downloaded!
Updating Basic BootWare? [Y/N]
5. Enter Y to upgrade the basic BootWare segment.
Updating Basic BootWare........Done.
Updating Extended BootWare? [Y/N]
6. Enter Y to upgrade the extended BootWare segment.
Updating Extended BootWare.........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare
|<2> Update Extended BootWare
|<3> Update Basic BootWare
|<4> Modify Ethernet Parameter
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-4):
:Main.btw
:
:Main.btw
:
:192.168.0.2
:192.168.0.1
:255.255.255.0
:0.0.0.0
Table
33
9.
|
|
|
|
|
|
|
|
|
|
|
|
|