Table of Contents
Advertisement
Clear Image Password Success!
If password recovery capability is disabled, first enable the capability from the CLI, and then
reboot the device to access the EXTENDED-BOOTWARE menu.
Password recovery capability is disabled. To perform this operation, first enable
the password recovery capability using the password-recovery enable command in CLI.
Managing storage media
Enter 9 in the EXTEND-BOOTWARE menu and press Enter.
Enter your choice(0-9):9
==============================<DEVICE CONTROL>==============================
|<1> Display All Available Nonvolatile Storage Device(s)
|<2> Set The Operating Device
|<3> Set The Default Boot Device
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-3):
Table 21 DEVICE CONTROL menu options
Option
<1> Display All Available Nonvolatile
Storage Device(s)
<2> Set The Operating Device
<3> Set The Default Boot Device
<0> Exit To Main Menu
Accessing the EXTEND ASSISTANT submenu
Press Ctrl+Z in the EXTEND-BOOTWARE menu.
==========================<EXTENDED ASSISTANT MENU>=========================
|<1> Display Memory
|<2> Search Memory
|<0> Exit To Main Menu
============================================================================
Enter your choice(0-2):
Table 22 EXTEND ASSISTANT submenu options
Option
<1> Display Memory
<2> Search Memory
<0> Exit To Main Menu
Description
Display all storage media on the MPU you are working with.
Set the current storage medium. All file operations in BootWare
menus are performed on the current storage medium.
Set the default storage medium from which the system will start up.
Return to the EXTENDED-BOOTWARE menu.
Description
View memory information that meets certain requirements.
Search memory for data that meets certain requirements.
Return to the EXTEND-BOOTWARE menu.
59
|
|
|
|
|
|
|
Advertisement
Table of Contents
Need help?
Do you have a question about the SECPATH 5080F-CMW710-R9628P2414 and is the answer not in the manual?