Sample Temperature Information; Printer Specifications - Applied Biosystems 2720 User Manual

Sample Temperature Information

Temperature

Printer Specifications

Serial Interface
Board Specifications
Cable Part Number
The table below lists sample temperature information.
Note Sample temperatures are displayed in degrees Celsius to the nearest 0.1 °C.
Sample Temperature Range
Temperature Calibration
The 2720 Thermal Cycler can use any printer with a serial (RS-232C) interface board
with the following parameters.
Baud Rate 9600
Parity NONE
Data Bits 8
Stop Bits 1
Connect the printer to the instrument port with printer cable part number N805-1326.
4.0 to 99.9 °C.
Traceable to National Institute of Standards and
Technology (NIST).
Specifications A-3