Creating Your Own Startup Screen; Capturing The Image - Epson PowerLite 500c User Manual Supplement

Fine-Tuning Your Projector
56

Creating Your Own Startup Screen

You can transfer any image on your computer to the projector,
and then use it as the screen displayed when the projector is not
receiving a signal. You can also set it to be displayed when you
press the button on the remote, or as a startup
A/V Mute
screen. The image can be a company logo, slogan, photograph,
or any other image you want to use.

Capturing the Image

You start by displaying the image you want to use on the
projector. You can use an image from either a computer or
video source such as a VCR or digital camera. Then follow these
steps to capture the image and transfer it to the projector:
1. Press the button. You see the main menu listing,
Menu
with the Video menu highlighted.
2. Press the bottom edge of the
to highlight the
User's Logo
3. Press to select this feature. You see the message
Enter
shown at the left.
4. Select and press
Yes
the image.
5. Use the button on the remote control to select the
Enter
area of the image you want to use. Once you have selected
the entire area, press
6. When you see the message "Do you use this image?" select
and press
Yes Enter
selected, select
No
shown at the left.
7. Use the button on the remote control to select a
Enter
zoom rate (display size), and then press
8. When the message "Do you save this user logo?" appears,
select and press
Yes
button (or tilt it down)
Enter
menu.
. A selection box displays over
Enter
.
Enter
. If you want to change the area
and repeat step 5. You see the message
Enter
.
Enter
.